FAQ

Q. How do RoofSmart Pads work? 

A. RoofSmart Pads have a light-weight, ABS hard shell with a soft foam rubber bottom designed to provide a non-slip grip and will evenly distribute a worker's weight preventing damage to any roof material. RoofSmart Pads even work on steep inclined roofs with our Steep Step. They give anyone that works on a rooftop peace of mind against damaging and breaking any and all roof material. 

Q. Is there a weight limit? How much weight can the RoofSmart Pads withhold to prevent roof material damage? 

A. The RoofSmart Pads can uphold anywhere from 200-300 lbs. Be careful using these pads on stacked and mudded clay tiles, as they are a lot more fragile. The more even and level the roof material surface is, the more effective the RoofSmart Pads will be to protect the roof material from damage and breakage. 

Q. What are the dimensions of the RoofSmart Pad? 

A. The RoofSmart Pad is 40" long and 24" wide and 3.5 inches high. Weight is approx. 11 pounds

Q. What are the pads made of? 

A. The RoofSmart Pad, Ladder Brace, and Steep Step are made of highly resilient ABS (Acrylonitrile Butadiene Styrene) plastic that is injection molded to create a very sturdy and long lasting shell.  We then add a high grade soft foam rubber pad that is glued to the bottom using a special industrial strength adhesive to ensure the foam stays on the shell for many years.   

Q. How do you use RoofSmart Pads? 

A. RoofSmart Pads can be laid out in a number of ways and configurations allowing the roof worker to easily and safely walk across the most fragile roof material without causing any damage.  You can tie the pads together for additional safety or spread them out depending on your work area. (Please watch this instructional video).

The RoofSmart Pad Ladder Brace is designed to easily attach onto the RoofSmart Pad giving your ladder a secure attachment so your ladder won't move from it's position. 

Q. Who would use the RoofSmart Pads? 

A. Anyone who does work on a roof from roof repairs and installations to Solar or Satellite installations, to Termite and Pest Control, Chimney Repair and Sweeps, Window Glazers and Washers, Security Camera Installers, Tree Trimmers, House Painters, Holiday Light Installers and more.  

Q. How many pads would you need to make a walkway up to the ridge?

A. On most roofs with pitches of 6 to 7/12 and less, at least 12 pads would be needed to make a good walkway for your crew members. 2 pads are needed to secure the ladder with our RoofSmart Ladder Brace; 1 for the bottom so the ladder doesn't kick out, and 1 for the top to attach the Ladder Brace to the RoofSmart Pad on the roof.

Q. Is the RoofSmart Pad OSHA approved? 

A. OSHA does not approve or endorse any products or services.  They do provide rules and guidelines for work environments and safety equipment.  RoofSmart Pads DO follow and comply with OSHA standards and we recommend adhering to all guidelines when using our product. 

Q. How do you properly store RoofSmart Pads?

A. We recommend you store the RoofSmart Pads in a secure and dry storage area when not in use. We also recommend that you never leave the RoofSmart Pads with the foam rubber side up as the sun's UVA & UVB rays can degrade the polyurethane foam quite rapidly.

Q. How long will the RoofSmart Pads last for?

A. With proper use and care RoofSmart Pads should last for 4-5 years. 

 

If you need to get on the roof, you're better off with the RoofSmart Tool System.